Water Insulation Product

  1. Homepage
  2. Water Insulation
  3. Hi-Tech WP-HYBRID

Hi-Tech WP-WP-HYBRID

Description:
Developed new generation insulation and floor covering. Due to its properties it is used alone instead of many insulation and floor coatings. Color formation, easy and practical workmanship, application on dry and slightly damp surfaces, UV and sunlight, human and vehicle traffic; Most importantly, it is very easy to use because of its quick and fast drying.

Using Areas:-Terrace and roof insulation
-Ornamental pools
-Wet room, bathroom and balconies
-Walkways, parking and garden floors
-Parking Area's floors, asphalt roads
-Factory and warehouse floors
-Pond and cisterns
Old or problematic insulations on them (the membrane, shingles, tar, asphalt, etc.)
Features / Benefits:It does not require additional protective screed or concrete application. Quick – drying. Non-cracking, the product will not be removed from the surface.
Consumption:1,8-2 kg / m² for two or three floors.
Storage:In dry environment, it can be stored for 9 months in unopened original packages.
Packaging:Total net 21 kg plastic buckets (6 kg liquid part + 15 kg powder lower part).

Technical Specifications

  • Water Transmission Rate : ≤ 0.1, CLASS W3
  • Permeability to water vapour: 5≤ sD ≤ 50, CLASS II
  • Adhesion strength by pull-off test: ≥ 1,0 N/mm2
  • Adhesion strength: ≥ 2,0 N/mm2
  • Density B Comp.: 1.00 ± 0.10
  • pH B Comp. (25°C): 7.0 - 9.0
  • Pot life: 30 - 40 min.
  • High temp. shorten time: ---
  • Service Temperature: (-30) - (+ 80) °C
TDS