Hi-Tech WP-WP-PP 650
Description:
HiTech WP-PP650 is the swimming pool paint based on polyurethane resin, consisting of two components, blue in color. It is not affected by the water and the water pressure. HiTech WP-PP650 is very ideal to use in swimming pools and decorative pools particularly in the cases where the ceramic covering is unable to apply. It gives a homogeneous blue appearance on the surface. It is elastic thus shows no crack, it is not affected by the UV lights and the swimming pool chemicals, the product has high resistance against alkali and chloride. It shows no color pale, no effect under water, no abrasion. The workmanship is very easy and economic
Using Areas:Concrete, plaster and alum. Swimming pools, water tanks, water storages. Metal tanks and water barrels Decorative pools, small lakes, barrages, water canals. Purification sites and balance warehouses. NOTE: During and after the application surfaces should be protected from rain, water, mechanical loads and impacts for 24 hours.
Pool Filling: After application, the pool should be left to cure for 10 days before it is filled with water.
Consumption:Depending on the surface approx. 1 kg / m² (2 coats application)
Storage:Can be kept for minimum 12 months in the original unopened pails in dry places and at temperatures of 5ºC-25ºC. Once a can has been opened, use as soon as possible.
Packaging:28 kg set (A Component: 24 kg can (Paint) + B component: 4 kg can (hardener)
Technical Specifications
- Chemical Base: Polyurethane based resin
- Density: 1,30 g/cm³
- Viscosity: 3500-4500 at 20ºC
- Shore-A Hardness: 70 (DIN 53505)
- Elongation at break: min. 500% at 23ºC
- Resistance to temperature: -30ºC to +60ºC
- Tensile strength at break: >4 N/mm² at 23ºC
- Weathering test: 2000 hours (ASTM G53)
TDS
EN
TR