Hi-Tech WP-ML LATEX
Description:
It is a synthetic rubber based, liquid additive that improves the processability and water impermeability performance of materials such as cement based mortar, plaster and screed.
Application Information:Surface Preparation:The application surfaces should be humid. The moisturizing process should be done until the surface is full. All surfaces must be clean and all impurities that affect the adhesion like dirt, oil, sludge, rust, etc. should be removed.
TDS
Using Areas:
- In all kinds of cement mortars,
- In plasters and screeds,
- Tiles, ceramic,
- Repair mortars, cold joints,
- In places where concrete repairs are required,
- In pre-plastering applications,
- To be used as a primer before waterproofig insulation applications.
For Adherence:It is applied to the surface with 150-200 mL/m² brush without thinning. It is applied on the mortar or bonding process within 30-40 minutes at the latest immediately after application.
Consumption:Min 25 m² / 1 Drum for adherence, Min 5 m³/1 Drum for mortar additives. (30 kg can)
Storage:Can be kept for minimum 12 months in the original unopened pails in dry places and at temperatures of 5ºC-25ºC. Once a can has been opened, use as soon as possible.
Packaging:10kg and 30kg plastic cans.
EN
TR